The EPEVER Tracer AN Sequence Photo voltaic Charge Controller is often a extremely effective photo voltaic controller designed for off-grid photo voltaic programs. Based on multiphase synchronous rectification engineering, it ensures optimized Electrical power conversion and method stability for an array of photovoltaic (PV) purposes.
Vital Functions in the EPEVER Tracer AN Collection Controller
The Tracer AN collection utilizes EPEVER Photo voltaic Demand Controller technological know-how for superior photo voltaic Power harvesting. Important attributes contain:
Multiphase Synchronous Rectification (MSR) for enhanced Strength conversion.
Advanced MPPT Algorithm with >99% performance.
Dual-Stage Charging for enhanced battery lifestyle.
LCD Show with genuine-time information checking.
Many Load Management Modes like manual and timer.
Comprehensive Electronic Protections in opposition to overcharging, about-discharging, quick circuits, and reverse polarity.
Step-by-Move Guideline to Putting together the EPEVER Tracer AN Sequence Controller
1. Unboxing and Preparing the Controller
Ensure all components are involved: Tracer AN unit, temperature sensor, communication cables, and consumer handbook.
Validate the design variety and voltage ratings match your photo voltaic panel and battery requirements.
two. Mounting the Demand Controller
Pick out a very well-ventilated, dry site near to the battery bank.
Secure the Tracer AN controller utilizing the presented mounting brackets.
Maintain right clearance for heat dissipation.
three. Wiring the Photo voltaic Charge Controller
Warning: Always stick to right security protocols and make sure the procedure is powered off ahead of connecting elements.
Action 1: Hook up the battery terminals on the cost controller (good to constructive, negative to detrimental).
Move 2: Link the photo voltaic panel array for the PV input terminals.
Move three: Link the load terminals if utilizing a direct load relationship.
Move four: Double-Examine all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electric power about the controller by connecting the battery very first.
Use the Liquid crystal display Screen to navigate the settings menu.
Configure:
Battery Style: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Guide, timer, light-weight Regulate.
five. Monitoring and Details Logging
The Tracer AN Series supports authentic-time monitoring utilizing Click Here the MT50 remote meter.
Facts could be logged via the RS485 conversation port working with computer software such as Photo voltaic Station PC.
Distant monitoring is achievable Together with the EPEVER WiFi module.
six. Troubleshooting Typical Challenges
Problem 1: No Electrical power Output
Check out battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Challenge two: Over-Voltage Security
Confirm the photo voltaic array’s voltage score.
Adjust technique parameters if essential.
Situation 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT configurations while in the menu.
Benefits of the Tracer AN Sequence with MSR Technological know-how
The multiphase synchronous rectification know-how guarantees:
Better Effectiveness: Reduced Strength losses during conversion.
Improved Dependability: Steady functionality below variable hundreds.
For a longer time Battery Lifestyle: Dependable and exact charging profiles.
Conclusion
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification technological innovation is definitely an Extraordinary option for optimizing solar power generation and increasing battery lifestyle. By pursuing the above mentioned setup manual, users can make sure utmost performance and procedure longevity.